VE3 Single Axis Small Slewing Device For Single Axis Solar Tracking System
The slewing drive is a new type of transmission product, it can rotate a heavy load with a very slow speed. It is usually composed of worm, gear, housing, motor and other components. Since the core components are the hourgalss worm and gear, they can simultaneously withstand axial forces, radial forces, and overturning moments. Compared with traditional rotary products, the new slewing drive features easy installation, easy maintenance and a greater degree of installation space.
Performance Parameters of VE Series
| Model |
Ratio |
Rated Output Torque |
Tilting Torque |
Axial Load |
Radial Load |
Holding Torque |
Efficiency |
Precision |
Self-locking |
Weight |
| N.m |
N.m |
kN |
kN |
N.m |
degree |
Yes |
kg |
| 3" |
31:1 |
300 |
1500 |
3.6 |
15 |
7000 |
40% |
≤0.1 |
Yes |
13 |
| 5" |
37:1 |
637.5 |
5000 |
16 |
27 |
9200 |
40% |
≤0.1 |
Yes |
18 |
| 7" |
57:1 |
1750 |
7000 |
34 |
58 |
13200 |
40% |
≤0.1 |
Yes |
28 |
| 8" |
51:1 |
2250 |
11200 |
50 |
80 |
20400 |
40% |
≤0.1 |
Yes |
35 |
| 9" |
61:1 |
4300 |
16000 |
60 |
130 |
27200 |
40% |
≤0.1 |
Yes |
51 |
| 12" |
78:1 |
5600 |
25000 |
77 |
190 |
40560 |
40% |
≤0.1 |
Yes |
61 |
| 14" |
85:1 |
6750 |
48000 |
110 |
230 |
44200 |
40% |
≤0.1 |
Yes |
78 |
| 17" |
102:1 |
9460 |
67000 |
142 |
390 |
53040 |
40% |
≤0.1 |
Yes |
105 |
| 21" |
125:1 |
16000 |
89000 |
337 |
640 |
65000 |
40% |
≤0.1 |
Yes |
185 |
| 25" |
150:1 |
21450 |
112000 |
476 |
950 |
89000 |
40% |
≤0.1 |
Yes |
244 |
Recommended slewing drive
| Enclosed housing slewing drive |
SE1 |
SE3 |
SE5 |
SE7 |
SE9 |
SE12 |
SE14 |
SE21 |
| Precise enclosed housing slewing drive |
ZE3 |
ZE5 |
ZE7 |
ZE9 |
|
|
|
|
| Worm gear slewing drive |
WE1 |
WE3 |
WE5 |
WE7 |
WE9 |
|
|
|
| Dual axis slewing drives |
SDE3 |
ZDE3 |
SDE5 |
ZDE5 |
SDE7 |
ZDE7 |
|
|
| Vertical enclosed slewing Drive |
VE3 |
VE5 |
VE6 |
VE7 |
VE9 |
VE12 |
|
|
DC Motor
1. Adopt Dual supporting structure for output shaft so that the max torque of gearbox is increased a lot.
2. Sun wheel and planetary wheel are connected by spline which increase the max torque of gearbox and lengthen the life.
3. We use helical gear at input stage which make the noise low anf run smoothly in high speed. The inner gear ring is separated so that we can make more ratio and the design is flexible. Gearbox and motor are located by a seam fix by screw in axial which increase the matching precision and reduce noise.
4. We use rolling pin holder inside planetary wheel.we use rolling pin grinding instead of sliding grinding so the life of gearbox is much longer.
5. Double supporting structure; Internal grinding on inner bore of planetary gears making the inner bore roundness less than 0.003mm;running by rolling instead of sliding; HRC60 gear surface precision scraping;The adopting of all these technoligies ensure the super quiet and steady operating and a long life time over 10000 hours.
Product Tags:
|
|
VE3 Solar Tracking Slewing Device 24VDC Motor Fire Proof For Open Field Images
|
